Cause & Consequence
- Electricity, electrical discharge, short circuit or overload
Incident Location
Any Location Type
Incident Activity
Maintenance
Incident Info Source
Dave Clinton. Tel: 01229 845064. E-mail clinton.d@hrl.co.uk
Specific Incident Equipment
"Klik" unit, two pin plug and socket
Lessons Identified
Faults can occur with inverters and where there are dual feeds measures should be taken to prove the fitting is dead before removing Klik units.
Incident Recommendations
When working on lighting circuits on site, isolate the MCB feeding the circuit then prove the light fitting to be worked on is dead. Only then remove the Klik units / units. |
When working on lighting circuits on site, isolate the MCB feeding the circuit then prove the light fitting to be worked on is dead. Only then remove the Klik units / units. |
When working on lighting circuits on site, isolate the MCB feeding the circuit then prove the light fitting to be worked on is dead. Only then remove the Klik units / units.
Rate this alert
Average Rating
Latest Alerts & Moments
Our searchable catalogue of hundreds of Safety Alerts and Safety Moments are all designed as learning resources that can help improve workplace safety.