Search for Safety Alerts and Moments

What’s the difference? Safety Alerts give details of events surrounding an incident, near-miss or good practice. Safety Moments are downloadable PowerPoint presentations which give details of an incident, near-miss or good practice, discussion questions and related resources. Please note that every Safety Alert and Moment is deliberately kept anonymous to encourage sharing within the industry. No companies, installations, dates or names will be identified within the Alert or Moment.

Rate this Safety Alert
0
No votes yet
Leak detected from a Flow Wing Valve actuator body vent. On investigation with gas detector at 1/2 metre distance, reading found to be 80%LEL. Read more
03 Apr 2014
Rate this Safety Alert
0
No votes yet
Gas Weep Detected within gas generator enclosure A faint smell of gas was reported to the control room. Operations Technicians investigated and identified a very low level of gas in the Gas Generator... Read more
03 Apr 2014
Rate this Safety Alert
1
Average: 1 (1 vote)
Gas migration from compressor wash line to water tank After completing a water wash of a compressor, 1.5 hours later a technician reported a smell of gas in the adjacent area. The smell was... Read more
03 Apr 2014
Rate this Safety Alert
0
No votes yet
Gas release from venting hose Due to low seal gas temperature on the HP flash gas compressor, it was necessary to vent the HP seal gas system. A hose was prepared for the activity and connected to... Read more
03 Apr 2014
Rate this Safety Alert
0
No votes yet
Pinhole leak in weld of a flowline sample point A technician spotted a drip of oil on a half inch sample point welded to a flowline. On closer inspection, it appeared to be coming from the half inch... Read more
03 Apr 2014
Rate this Safety Alert
0
No votes yet
Gas leak from the body seal joint a 16inch on the injection header. A member of a fabric maintenance crew working on the mezzanine deck heard, smelt and reported a gas leak, emanating from the... Read more
01 Apr 2014
Rate this Safety Alert
0
No votes yet
Release of hydrocarbons from the HP vent stack During a routine venting operation of the A3 well there was a hydrocarbon liquid release resulting in a loss of containment. The venting of well A3 was... Read more
01 Apr 2014
Rate this Safety Alert
0
No votes yet
Gas leak from the main sealine isolation valve ESD XZV-47719. The platform was completing re-commissioning activities, and conducting ESD validation testing. During the testing the close limit switch... Read more
01 Apr 2014
Rate this Safety Alert
0
No votes yet
Liquid hydrocarbon leak from an IBC. The operations team were working in accordance with the procedure, which stipulated that ullage should be available in the desander prior to draining down from... Read more
01 Apr 2014
Rate this Safety Alert
0
No votes yet
Gas leak from a valve stem During a routine platform inspection tour, an operator detected a smell of gas from the vicinity of the common injection header isolation valve XCV-40008. Further... Read more
01 Apr 2014

Pages