Search for Safety Alerts and Moments

What’s the difference? Safety Alerts give details of events surrounding an incident, near-miss or good practice. Safety Moments are downloadable PowerPoint presentations which give details of an incident, near-miss or good practice, discussion questions and related resources. Please note that every Safety Alert and Moment is deliberately kept anonymous to encourage sharing within the industry. No companies, installations, dates or names will be identified within the Alert or Moment.

Rate this Safety Alert
5
Average: 4.7 (3 votes)
A piece of angle iron weighing 7.75 kg, used to secure the draw-works exhaust ducting dropped from approximately 12m. The angle iron hit and smashed the re-enforced glass roof of the dog house,...
23 May 2016
Rate this Safety Moment
Average: 5 (12 votes)
What happened The LCV was not designed for the current flowrates, leading to vibration Vibration caused a crack in the 2’’ line connected to the condensate outlet, Condensate leaked out at ~8 kg/...
18 Apr 2016
Rate this Safety Moment
Average: 4 (2 votes)
Smoke entered the cabin when one exit was opened. This exit was declared unsafe and immediately closed, resulting in one less emergency exit. Passengers ignored safety protocols and grabbed their...
05 Apr 2016
Rate this Safety Alert
Average: 4.5 (4 votes)
The IP first tested the upward function of the board by hoisting the carriage up a couple of feet. When attempting to move the carriage back down, the Sky Locks engaged (still under investigation)...
05 Apr 2016
Rate this Safety Alert
Average: 4.8 (4 votes)
There is a difference between the current IEC 60079-14: 2013 Standard and previous versions of BS EN 60079-14:2018 and IEC 60079-14:2007 for using electrical equipment in potentially explosive...
29 Feb 2016
Rate this Safety Alert
Average: 4.5 (10 votes)
During routine 5-yearly NDT inspection, cracks were found in the bottom fork of the FPDs fitted to the Mills release gear on Watercraft lifeboats. Further investigation revealed similar failures on...
19 Feb 2016
Rate this Safety Moment
Average: 4.1 (11 votes)
The failure occurred due to incorrect manufacturing and the final material properties did not meet requirements; causing the clamp to fail.
09 Feb 2016
Rate this Safety Moment
Average: 4.9 (8 votes)
There was a sudden, uncontrolled release of pressure when the last retaining bolt was removed. The technician sustained injuries.
08 Feb 2016
Rate this Safety Moment
Average: 4.8 (4 votes)
The leak was confirmed and the plant was safely shutdown. The leak came from a failed O-ring seal.
04 Jan 2016
Rate this Safety Moment
Average: 4.3 (3 votes)
An inspection crew was conducting a proactive inspection of a gas export system using an infrared camera which looks for very small leaks (fugitive emissions). A small leak was observed around the...
13 Nov 2015

Pages